Fabryka Sprężyn MAZOWIANKA

Bent elements made of spring wires

Mazowianka offers bent components made from patented spring wires according to PN-EN 10270-1 and stainless steel according to PN-EN 10270-3, as well as general-purpose wires according to PN-67/M-80026, with diameters ranging from d=0.60 to 10.00 mm. These components include: paint hangers, elements of advertising stands, seat frame components, etc.

Tension Springs - d=0.30-12.00 mm

We produce tension springs according to the following parameters: Wire diameter: d=0.30 - 12.00 mm Outer diameter of the spring: Dz <= 155 mm Total length of the spring: Lo <= 3500 mm

Compression springs - spring wire PN-EN 10270

Mazowianka, as a leading manufacturer of springs in the market, specializes in the production of technical springs. The springs are made from patented spring wires according to PN-EN 10270-1 and stainless steel according to PN-EN 10270-3, with diameters ranging from d 0.30 to 12.00 mm. We produce compression springs according to the following parameters: - Wire diameter: d=0.30 - 12.00 mm - Outer diameter of the spring: Dz <= 155 mm - Total length of the spring: Lo <= 3500 mm

Agricultural Springs - made of spring wires

Mazowianka has been known for many years as a manufacturer of parts for agricultural machinery. The springs are made from patented spring wires according to PN-EN 10270-1 and stainless steel according to PN-EN 110270-3 in the diameter range of: d 0.30 - 12.00 mm.

Torsion Springs - PN-EN 10270 1 SH

Mazowianka is one of the main producers of torsion springs for garage doors. The maximum length of the produced springs is Lmax <= 3,500mm. The springs are made from patented spring wires according to PN-EN 10270 1 SH in the diameter range: d=5.00 - 12.00 mm.

Ożarów Mazowiecki

Lublin

Pruszków

Warszawa

Olkusz

Kraków